Walksnail Avatar HD Kit V2 32G

Product detailed description

recording to internal storage in fullHD resolution, 120 frames per second, native 4:3 sensor
Support Gyroflow - in-camera gyro
1080P HD FPV
Large F/2.0 aperture
160° wide-angle FOV

Mounting holes both 20*20mm and 25*25
Built-in 32g storage
New PCB and outer shell design
Solder pad added to provide two power connection modes
Optimized antenna base design and frequency button position for convenience

Compatibility 1080P 120fps
Low latency 22ms
Distance measurement mode
Lightweight design
FOV 160°
Built-in 32G storage,
Support Gyroflow
Cancellation for GPS use
6V-25.2V input power
The only native 4:3 high resolution sensor in FPV

The Avatar HD system uses H.265 code, a cutting-edge technology that delivers 1080p FPV image quality with ultra-low latency.
The V2 camera with 2K pixels, a native 4:3 sensor for better image quality, and a native 4:3 aspect ratio allows you to capture more of the surrounding scenery while flying your drone, resulting in more complex and visually appealing images. Meanwhile, it's also better suited for a regular FPV race.

In addition to the original 25mm x 25mm mounting holes, the kit has now added 20mm x 20mm holes for greater compatibility with a wider range of FPV drone models.
Updated PCB and shell design, improved VTX quality, more durable.
Optimized antenna mounting location to better protect VTX.

New VTX with improved TVS protection and support for up to 6S. With a wide input voltage range of 6V to 25.2V, our VTX provides unmatched stability and resistance to GPS interference. Enjoy unmatched performance and take your FPV adventures to new heights with our cutting-edge technology.

Avatar VTX comes with 32G built-in storage, it can record 1080p or 720p HD flight videos. 32G built-in storage, the video recording time will be extended 4 times.

Supports both high frame rate and standard frame rate, has an average latency of 22ms with high frame rate.

Compact and convenient single antenna design makes it easy to assemble your FPV drone. The antenna quality is improved and the working performance of the whole frequency band is more stable.

FPV Camera:

• Avatar V2 camera model
  
• Image sensor 1/3.2-inch 4Mp 4:3 sensor
  
• FPV transmission resolution 1080P/60fps; 720P/100fps; 720P/60fps; 1080P/120fps compatibility; 1080P/100fps compatibility;
  
• 4:3 native/16:9 ratio
  
• 2.1mm lens
  
• FOV 160°
  
• F2.0 aperture
  
• Min. illumination 0.001 Lux
  
• Weight 7.2g
  
• Dimensions 19*19*22mm
  
• Coaxial cable 140mm
  
• Gyroflow supported

VTX

• Avatar V2 module model
  
• Communication frequency 5.725-5.850 GHz
  
• Transmitter power (EIRP) FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;
  
• MIC: <25dBm
  
• 1/O Interface JST1.0*4(Power)JST0.8*6(USB)
  
• Mounting holes 25.5*25.5mm; 20*20mm
  
• Dimensions 33.5*33.5*10.5mm
  
• Storage 32G
  
• Weight 17.6g
  
• Operating temperature -20-40℃
  
• Channels 8
  
• Wide power input 6V-25.2V
  
• Supported FC system Betaflight; Inav; Fettec; ArduPilot;
  
• OSD Canvas mode
  
• Latency Average latency 22 ms
  
• Antenna 1 (IPEX)
  

Avatar V2 Antenna

• LHCP polarization
  
• Frequency Range 5600MHz-6000MHz
  
• Gain 1.9 dBi
  
• VSWR ≤1.5
  
• Input impedance 50Ω
  
• IPEX-1 Interface
  
• Size R15 x 45 mm (without cable)
  
• Weight 2g
  

Package Contents:

• USB transmission extension cable X1
  
• 4-pin silicone cable X1
  
• M2*4mm screws X8
  
• M2*5mm screws X4
  
• M2*6mm screws X4
  
• M2*14mm screws X4
  
• M2*5*0.5mm gaskets X4