SkyStars F7 HD Pro 3 + KO60 128K BLHeli_32 ESC 30×30 Stack

Product detailed description

SkyStars F7+ KO60 Blheli_32 Fly Tower Stack is equipped with the latest FC SkyStars F7 HD Pro3 with large soldering surfaces, which makes it suitable for beginners. It is possible to power the receiver directly to the FC. The powerful ESC will deliver enough power for your FPV copter!

Specifications
F722 HD PRO2 FC

• Receiver: support Sbus, crsf, ibus, Spektrum 1024/2048, SBUS, XBUS, SumD and SumH RX. Built-in inverter, 3.3v spectral satellite receiver support, PPM receiver support. The default receiver input is UART 1, the F7 has a built-in inverter that can be used in any available UART.
• LED: 4 independent LED pads, support WS2812 programming
• Standard 30.5mm mounting holes.
• OSD: Betaflight OSD & DJI HD OSD (UART6)
• Input Voltage: 3-6S LiPo (11.1V~22.2V)
• 6 Hardware UARTS (UART123456)
• MCU: STM32F722RGT6 216 MHz
• Firmware: SKYSTARS F7HD
• Dimensions: 38,5x40x6,2mm
• USB connection: USB-C
• IMU: BMI270
• BEC 5V 3A & 10V 3A
• Beeper: YES
• Blackbox: 16 MB
• CURR sensor: YES
• RSSI Pad: YES
• Weight: 6.8g

KO 60A Blheli 32 ESC

• Protocol: Dshot300-1200 / Proshot1000 / Oneshot / Multishot / PWM
• MCU: STM32F051 Operating frequency: 48MHz
• Peak current [5 seconds]: 65A
• Mounting: 30.5mm x 30.5mm
• Continuous current: 60A
• Firmware: BLHeli_32
• ESC Weight: 12g
• Supports 3-6S
• BEC: No

Package Contents:

• 1 x SkyStars F7 F722 HD 3 Pro Flight Controller
• 1 x SkyStars RC KO60 60A BLHELI_32 4-in-1 30X30 ESC
• 1x interconnect cable
• 1x XT60 connector
• 1x capacitor