MATEKSYS FLIGHT CONTROLLER F722-SE

Product detailed description

FC control board for your drone with powerful F7 processor and built-in PCB distribution for 4 separate ESCs.

FC specifications:

• 216 MHz STM32F722RET6 MCU.
  
• IMU: MPU6000 & ICM20602, built-in dual gyro (SPI)
  
• Baro: BMP280 or DPS310 (I2C)
  
• OSD: AT7456E (SPI)
  
• Blackbox: MicroSD card slot (SPI)
  
• 5x Uarts (1,2,3,4,6) with built-in inversion
  
• 1x Softserial supported
  
• 8x Dshot/Proshot/oneshot outputs
  
• 1x I2C
  
• 4x separate ESC power/signal pads
  
• 1x Group of pads G/S1/S2/S3/S4 for 4in1 ESC Signal/GND
  
• 3x LEDs for FC status (blue, green) and 3.3V indicator (red)
  
• Output power filtered Vbat for VTX, switchable via AUX (tab-user1 modes)
  
• Dual camera image, switchable via AUX (tab-user2 modes)
  
• Camera control: Yes
  
• Protocol Smartaudio & Tramp VTX: Yes
  
• WS2812 LED strip: Yes
  
• Beeper: Yes
  
• RSSI: Yes
  
• Additional ADC for analog INAV airspeed
  
• Input: 6~36V (3~8S LiPo) with TVS protection
  
• PDB: 4x35A (max 4x46A)
  
• BEC: 5V 2A cont. (Max. 3A)
  
• LDO 3.3V: Max.200mA
  
• Current Sensor 184A (Scale 179)
  
• Battery Voltage Sensor: 1:10 (Scale 110)
  
• Mounting: 30.5 x 30.5 mm, Φ4 mm with Φ3 mm grommets
• Dimensions: 36 x 46 mm
• Weight: 10g

Firmware FC:

• BetaFlight / INAV
  
• Target: MATEKF722SE
  

Package includes:

• 1x FC F722-SE
  
• 6x silicone grommets M4 to M3
  
• 1x FR4 PCB board 36*36*1mm
  
• 1x Rubycon ZLH 35V/470uF (Low ESR)